Question: How Do You Paint Stair Spindles Fast?

Should I paint or stain my handrail?

Stains are generally more durable than paint, and lighter tread paints may begin showing scuffs and marks before stains or darker paints.

Painting over dated, stained wood on spindles, risers, and handrails is one of the most cost-effective ways of transforming your staircase or stairwell..

What paint do you use on bannisters?

Use a specialist wood primer and undercoat Dulux Speed Undercoat on all the bare wood surfaces and exposed filler. When your primer is completely dry, you’re ready to paint. Start at the top of the staircase and work your way down, making sure to work your brush into the grain of the wood.

Do I have to sand spindles before painting?

This will provide “tooth” for the primer + paint to adhere. You don’t have to sand to the bare wood, but do try to remove any shine. … Once balusters are completely dry, use a 1″- wide angled brush to prime and paint. This will make it easy.

Is it easy to replace stair spindles?

David Raymond, owner, Raymond Design Builders, replies: A stair with missing balusters is not only unsafe, particularly for children, it’s about as attractive as a hockey goalie’s grin. Fortunately, replacing them is fairly easy for anyone who can use a miter saw. It just requires some advance work.

How do you sand stairs spindles?

The proper way to sand spindles is with two grades of sandpaper — from heavy to light.Fold a sheet of 100-grit sandpaper three times. … Revolve the spindle back and forth, twisting it while you encircle it with the sandpaper. … Slide the cylinder of sandpaper down or up the spindle, overlapping the first area by 1 inch.More items…

How do you paint stair banisters?

Once you’re happy with the stain, paint a coat of your primer onto your spindles. Use a fine paintbrush around the edges that meet with the stain and be extra careful to not get any paint on the stain. Then apply 1-2 coats of your semi-gloss paint to each of your spindles. (We would paint in sections.

What kind of paint do you use on stairs?

For the risers and spindles, use white semi-gloss with primer already in it. For the treads and rails, use a porch and floor paint. For the first coat, tint primer with your selected color.

How much does it cost to replace stair spindles?

Cost to Replace Banisters and Balusters Replacing balusters (also called spindles) typically costs anywhere from $1,200 to $1,600. Putting in a handrail will likely cost anywhere from $700 to $2,500.

How do you remove stair spindles from painting?

Walk to the top of the stairs and look between the first spindle and the newel post (the newel posts are the main posts that support the handrail). Look underneath the handrail and you’ll see a short piece of filler wood pressed in between the spindle and the newel post. Pry this piece out with a flathead chisel.

What color should stair railing be?

A combination of gray and white gives an airy feeling to the stairway, offering a lovely departure from black and white. Combine the two with gray on the railing and newel posts and white on the spindles, or opt for an all-grey banister for a spa-like look. Swap the gray paint to a rich navy or near-black green.

Can you paint spindles with a roller?

Rolling is one of the key reasons I got this project done so fast, it’s WAY easier than hand brushing, you can get them fully coated in no time at all! PLEASE be sure your roller isn’t over saturated with paint, I dip my roller evenly into the paint and try to get off the majority of the paint into the tray.

What is the best paint to use on stair banisters?

The most durable paints will be a satin or high-gloss sheen. Believe me, you do not want a use a very flat paint like chalk paint (unless you use a protective top coat like polyurethane) on a high traffic piece such as a kitchen table or these stair railings.

How do you prepare stair spindles for painting?

Before priming, wipe the surface with a damp rag, or a tack cloth, to get rid of sanding dust. Make sure the surface below is protected. If the spindles are unpainted and you plan to coat them with acrylic paint, an oil-based primer sealer should be used, not latex.